Industrial Security Requirements: Design & Compliance Workflow
This industrial security compliance training course follows a security project from facility classification to an approved design. You will learn how security requirements are structured, how the approval workflow runs from the risk assessment through the design stages to factory and site acceptance testing, and what reviewers expect for perimeters, vehicle barriers, lighting and power, integrated security systems and information protection — then prepare a compliant submittal and learn the most common reasons designs are rejected.
Course at a glance
| Duration | 8 hours of instruction |
|---|---|
| Modules | 10 modules, including a final assessment |
| Level | Intermediate |
| Format | Live online or in-house at your facility, for individuals and company teams |
| Prerequisites | Industrial Security Fundamentals or equivalent experience on security projects |
| Certificate | Be Safe certificate of training completion for 8 hours, with a unique ID and QR code, verifiable on our certificate verification page |
Who this industrial security compliance training is for
- Security consultants and design engineers
- Systems integrators and their project teams
- Owner and operator security coordinators
- Project managers responsible for security packages
What you will be able to do
- Read security requirements and tell mandatory from advisory language
- Plan a project through the approval workflow and design stages
- Specify perimeters, gates and crash-rated vehicle barriers with evidence
- Define integrated security system requirements and control room functions
- Prepare a design basis report and compliance matrix that pass review
Course modules
10 modules, 8 hours of instruction:
- The Regulator & Its Directives — Mandate & Legal Status, Security & Safety Requirement Families, How a Directive Is Structured — Shall vs Should, Handling Restricted Documents
- Facility Classification & General Requirements — Facility Classes 1–4, Applicability by Class, Qualified Consultants & Approved Integrators, Deviations & Waivers
- The Approval Workflow — SVA Submission & Approval, Design Stages: 10%, 30%, 60%, 90% & IFC, FAT/SAT & Regulator Witnessing, Integrator Prequalification
- Perimeter, Gates & Vehicle Barriers — Security Fencing & Clear Zones, Gates & Checkpoints, Anti-Vehicle Barriers & Crash Rating Evidence, Common Perimeter Rejections
- Security Lighting, Power & Communications — Perimeter & Checkpoint Lighting, Emergency Power & UPS, Network Architecture & Redundancy, Cable Routing & Protection
- Integrated Security Systems — Access Control Requirements, Video Surveillance Requirements, Perimeter Intrusion Detection Requirements, Integration, Control Room & Alarm Assessment
- Security Devices, Doors, Locks & ID — Turnstiles & Screening Equipment, Bullet-Resistant Glazing & Drop Gates, Security Doors, Locks & Key Control, ID Cards & Personnel Verification
- Information Protection & Cybersecurity — Protecting Security Design Documents, Need-to-Know Controls, Network Segregation & Hardening
- Preparing a Compliant Submittal — Design Basis Report & Compliance Matrix, Drawings, Calculations & Datasheets, Responding to Regulator Comments, Top Rejection Reasons
- Workshop & Assessment — Compliance Matrix Exercise, Submittal Review Exercise, Final Exam
Format and certificate
Delivered by Be Safe instructors as live online sessions or in-house at your facility, for individuals and company teams. Successful participants receive a Be Safe certificate of training completion for 8 hours, with a unique certificate ID and QR code that employers and clients can check on our certificate verification page.
Frequently asked questions
Is this a regulatory certification?
No. It is an independent Be Safe training course that prepares you to work to the security requirements of your regulator and client. You receive a verifiable Be Safe certificate of training completion, not a regulatory approval.
Who should attend the industrial security compliance training?
Security consultants and design engineers; Systems integrators and their project teams; Owner and operator security coordinators; Project managers responsible for security packages.
How long is the course and how is it delivered?
8 hours of instruction across 10 modules, delivered live online or in-house at your facility. Sessions can be scheduled to suit shift patterns for company teams.
Are there any prerequisites?
Industrial Security Fundamentals or equivalent experience on security projects.
What does a compliant security design submittal include?
Typically a design basis report, a compliance matrix against the applicable requirements, drawings, calculations and equipment datasheets. The course shows how to prepare each and how to respond to reviewer comments.
What are the most common reasons security designs are rejected?
Incomplete compliance matrices, missing crash-rating evidence for vehicle barriers, gaps in perimeter detection or lighting coverage, and designs that do not trace back to the risk assessment. The course works through these with examples.
How can employers check my certificate?
Every certificate has a unique ID and a QR code. Anyone can scan the code or enter the ID on our certificate verification page to confirm the holder, the course and the completion date.
Can you deliver it to our whole team?
Yes. We run the course live online for teams across sites, or in-house at your facility, and can focus the case studies on your own systems and projects.
How do I enrol and what does it cost?
Contact us or message us on WhatsApp and we will confirm the next cohort dates and the price for individuals or groups.
ملخص الدورة
دورة في متطلبات الأمن الصناعي ومسار التصميم والاعتماد، تغطي تصنيف المنشآت ومراحل التصميم واختبارات المصنع والموقع، ومتطلبات الأسوار والبوابات وحواجز المركبات والإضاءة والطاقة والأنظمة الأمنية المتكاملة وحماية المعلومات، وصولاً إلى إعداد ملف تصميم مطابق للمتطلبات. مدة الدورة 8 ساعات مع شهادة إتمام قابلة للتحقق.
Related training: API 780 Security Risk Assessment · Saudi Compliance training · all HSE training.
This is an independent training course by Be Safe Ltd. It does not replace the requirements issued by your regulator or client, and the certificate is a certificate of training completion, not a regulatory approval or certification.
