Testing, Commissioning & Maintenance of Security Systems
This security systems testing and commissioning training course covers the full lifecycle of proving a security system works — from the inspection and test plan and factory acceptance testing, through installation inspection and device-level tests of cameras, access control, perimeter intrusion detection, barriers and screening equipment, to network and power testing, site acceptance and soak tests, handover and long-term maintenance.
Course at a glance
| Duration | 7 hours of instruction |
|---|---|
| Modules | 10 modules, including a final assessment |
| Level | Intermediate |
| Format | Live online or in-house at your facility, for individuals and company teams |
| Prerequisites | Basic knowledge of electronic security systems such as CCTV, access control or intrusion detection |
| Certificate | Be Safe certificate of training completion for 7 hours, with a unique ID and QR code, verifiable on our certificate verification page |
Who this security systems testing and commissioning training is for
- Commissioning and testing engineers
- Systems integrators and site supervisors
- Owner and operator maintenance teams
- QA/QC and project engineers on security packages
What you will be able to do
- Write an inspection and test plan and FAT and SAT procedures
- Inspect cabling, grounding, mounting and civil works
- Test cameras (including DORI), access control, PIDS and barriers
- Verify network, PoE and UPS performance and cyber hardening
- Hand over with complete records and set up preventive maintenance and KPIs
Course modules
10 modules, 7 hours of instruction:
- T&C Lifecycle & Planning — Lifecycle & Roles, Inspection & Test Plan (ITP), Material Submittals & Receiving Inspection, Quality Records
- Factory Acceptance Testing (FAT) — FAT Scope & Procedure, Test Setup & Simulation, Witnessing, Punch List & Sign-Off
- Installation Inspection — Cabling, Termination & Labelling, Grounding & Bonding, Mounting & Field-of-View Checks, Civil Works: Fence & Bollard Foundations
- Device-Level Testing — Cameras: Image Quality, DORI & Night Performance, Access Control: Readers, Locks & Door Monitoring, PIDS: Detection & Nuisance Alarm Testing, Barriers, Gates & Screening Equipment
- Network & Power Testing — Copper & Fibre Testing (incl. OTDR), PoE Budget Verification, UPS & Generator Transfer Tests, Cyber Hardening Checks
- SAT & Performance Testing — Writing a SAT Procedure, Integration & Cause-and-Effect Testing, Failure Mode & Regulator Witness Tests, Soak Test & Acceptance Criteria
- Handover — As-Built Drawings & O&M Manuals, Operator Training, Spares, Warranties & Final Acceptance
- Maintenance & Periodic Testing — Preventive Maintenance Schedules, Corrective Maintenance & Response Times, Periodic Tests & Records, KPIs & AMC Scoping
- Safety During Testing & Commissioning — Live Electrical Systems & Lockout/Tagout, Barrier Crush & Impact Hazards, Working at Height & Permit to Work
- Workshop & Assessment — FAT/SAT Script Writing Exercise, Final Exam
Format and certificate
Delivered by Be Safe instructors as live online sessions or in-house at your facility, for individuals and company teams. Successful participants receive a Be Safe certificate of training completion for 7 hours, with a unique certificate ID and QR code that employers and clients can check on our certificate verification page.
Frequently asked questions
Is this a regulatory certification?
No. It is an independent Be Safe training course that prepares you to work to the security requirements of your regulator and client. You receive a verifiable Be Safe certificate of training completion, not a regulatory approval.
Who should attend the security systems testing and commissioning training?
Commissioning and testing engineers; Systems integrators and site supervisors; Owner and operator maintenance teams; QA/QC and project engineers on security packages.
How long is the course and how is it delivered?
7 hours of instruction across 10 modules, delivered live online or in-house at your facility. Sessions can be scheduled to suit shift patterns for company teams.
Are there any prerequisites?
Basic knowledge of electronic security systems such as CCTV, access control or intrusion detection.
What is the difference between FAT and SAT?
A factory acceptance test (FAT) proves the system and its configuration at the supplier before shipment; a site acceptance test (SAT) proves the installed system works on site, integrated with everything around it. The course covers both, with sample procedures.
Does the course cover maintenance after handover?
Yes. It covers preventive and corrective maintenance, periodic tests and records, response times and the KPIs to put in a maintenance contract.
How can employers check my certificate?
Every certificate has a unique ID and a QR code. Anyone can scan the code or enter the ID on our certificate verification page to confirm the holder, the course and the completion date.
Can you deliver it to our whole team?
Yes. We run the course live online for teams across sites, or in-house at your facility, and can focus the case studies on your own systems and projects.
How do I enrol and what does it cost?
Contact us or message us on WhatsApp and we will confirm the next cohort dates and the price for individuals or groups.
ملخص الدورة
دورة في اختبار وتشغيل وصيانة الأنظمة الأمنية، تغطي خطة الفحص والاختبار واختبارات المصنع (FAT) وفحص التركيب واختبار الكاميرات وأنظمة التحكم في الدخول وأنظمة كشف التسلل المحيطي والحواجز والشبكات والطاقة، ثم اختبارات الموقع (SAT) والتسليم والصيانة الدورية. مدة الدورة 7 ساعات مع شهادة إتمام قابلة للتحقق.
Related training: API 780 Security Risk Assessment · Saudi Compliance training · all HSE training.
This is an independent training course by Be Safe Ltd. It does not replace the requirements issued by your regulator or client, and the certificate is a certificate of training completion, not a regulatory approval or certification.
